Background : Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study [2]
Background : Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study [2]
author: David E Simmons, Pooja Maney, Austin G Teitelbaum, Susan Billiot, Lomesh J Popat, A Archontia Palaiologou | publisher: drg. Andreas Tjandra, Sp. Perio, FISID
A recent systematic review by Stocchero et al. concluded that an undersized drilling protocol in soft bone is an effective way to enhance insertion torque but recommended that further clinical studies are needed to confirm these data [18]. Our study was designed to address this question, as it compared the standard drilling protocol to a soft bone protocol.
Our study hypothesis is that the stability of the OSPTX implant will be greater than that of the OSP implant due to the tapered design of the OSPTX implant.
The objectives of this study were the following:
To determine whether preparation of the osteotomy with a soft bone protocol (underpreparation of the osteotomy compared to the implant diameter by −0.5 mm at the body portion) results in greater primary implant stability
To investigate possible correlations between ISQ and torque values
To evaluate radiographic bone loss at 6 months and 1 year
Serial posts:
- Abstract : Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study [1]
- Abstract : Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study [2]
- Background : Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study [1]
- Background : Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study [2]
- Methods : Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study [1]
- Methods : Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study [2]
- Results : Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study
- Discussion : Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study [1]
- Discussion : Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study [2]
- Conclusions : Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study
- Notes : Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study
- References : Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study [1]
- References : Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study [2]
- References : Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study [3]
- Author information : Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study
- Rights and permissions : Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study
- About this article : Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study
- Table 1 Patient selection criteria : Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study
- Table 2 Outcome success criteria : Comparative evaluation of the stability of two different dental implant designs and surgical protocols—a pilot study
- Fig. 1. Implant design. The OSPTX and OSP implants are manufactured from high-grade commercially pure titanium with surface roughness produced via a fluoride treatment process. The OSP implant is a screw-shaped self-tapping implant. The diameter used in this study was 4.0 mm. The implant length used in this study was 8 mm. The OSPTX implant has the same features as the OSP except the apex of the implant is tapered : Comparative evaluation of the stability of two different dental implant
- Fig. 2. ISQ values at placement, 6 weeks, 6 months, and 1 year. Mean and standard deviation of ISQ values taken at placement, 6 weeks, 6 months, and 1 year is presented. No statistical significant difference was determined between ISQ values at all time points. (p < 0.05) : Comparative evaluation of the stability of two different dental implant
- Fig. 3. Mean bone loss at 6 months and 1 year. Mean bone loss distribution charts at 6 months and 1 year present no statistically significant difference. p value at 6 months was 0.2981 and at 1 year 0.6613 : Comparative evaluation of the stability of two different dental implant