Figure 1. Standard protocol. This figure shows the implant types and drilling protocol used within this study. Standard protocol was conducted
Figure 1. Implant types and drilling protocol
author: Henning Staedt,Peer W Kmmerer,Elisabeth Goetze,Daniel G E Thiem,Bilal Al-Nawas, Diana Heimes | publisher: drg. Andreas Tjandra, Sp. Perio, FISID
![Figure 1. Standard protocol. This figure shows the implant types and drilling protocol used within this study. Standard protocol was conducted by a final drill of 2.80 mm for 3.3 mm implants, 3.20 mm for 3.75 mm implants, and 3.65 mm for 4.2 mm implants. Permissions for reproducing the figures were received from HI-TEC IMPLANTS LTD. Source: Product Catalogue 12th Edition [40] Figure 1. Standard protocol. This figure shows the implant types and drilling protocol used within this study. Standard protocol was conducted by a final drill of 2.80 mm for 3.3 mm implants, 3.20 mm for 3.75 mm implants, and 3.65 mm for 4.2 mm implants. Permissions for reproducing the figures were received from HI-TEC IMPLANTS LTD. Source: Product Catalogue 12th Edition [40]](https://palmerah.implantgigi.com/insight/image/1/Figure_1_Standard_protocol.jpeg)
Serial posts:
- Implant primary stability depending on protocol and insertion mode — an ex vivo study
- Background : Implant primary stability depending on protocol and insertion mode (1)
- Background : Implant primary stability depending on protocol and insertion mode (2)
- Background : Implant primary stability depending on protocol and insertion mode (3)
- Methods : Implant primary stability depending on protocol and insertion mode (1)
- Methods : Implant primary stability depending on protocol and insertion mode (2)
- Results : Implant primary stability depending on protocol and insertion mode
- Discussion : Implant primary stability depending on protocol and insertion mode (1)
- Discussion : Implant primary stability depending on protocol and insertion mode (2)
- Discussion : Implant primary stability depending on protocol and insertion mode (3)
- Table 1 Comparison of standard and over-dimensioned protocol
- Table 2 Comparison of manual and machine-driven insertion mode
- Table 4 Comparison of implant length
- Table 3 Comparison of implant diameter
- Figure 1. Implant types and drilling protocol
- Figure 2. Over-dimensioned protocol
- Figure 3. Comparison of standard and over-dimensioned protocol