References : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model [1]
Frost HM. Wolff’s Law and bone’s structural adaptations to mechanical usage: an overview for clinicians. Angle Orthod. 1994;64:175–88.
Duyck J, Rønold HJ, Van Oosterwyck H, Naert I, Vander Sloten J, Ellingsen JE. The influence of static and dynamic loading on marginal bone reactions around osseointegrated implants: an animal experimental study. Clin Oral Implants Res. 2001;12:207–18.
Quirynen M, Naert I, van Steenberghe D. Fixture design and overload influence marginal bone loss and fixture success in the Brånemark system. Clin Oral Implants Res. 1992;3:104–11.
Hoshaw SJ, Brunski JB, Cochran GVB. Mechanical loading of Brånemark implants affects interfacial bone modelling and remodeling. Int J Oral Maxillofac Implants. 1994;9:345–60.
Isidor F. Loss of osseointegration caused by occlusal load of oral implants. A clinical and radiographic study in monkeys. Clin Oral Implants Res. 1996;7:143–52.
Kitagawa T, Tanimoto Y, Nemoto K, Aida M. Influence of cortical bone quality on stress distribution in bone around dental implant. Dent Mater. 2005;24:219–24.
Limbert G, van Lierde C, Muraru OL, Walboomers XF, Frank M, Hansson S, et al. Trabecular bone strains around a dental implant and associated micromotions. A micro-CT-based three-dimensional finite element study. J Biomech. 2010;43:1251–61.
Matsunaga S, Naito H, Tamatsu Y, Takano N, Abe S, Ide Y. Consideration of shear modulus in biomechanical analysis of peri-implant jaw bone: accuracy verification using image-based multi-scale simulation. Dent Mater. 2013;32:425–32.
de Vasconcellos LG, Nishioka RS, de Vasconcellos LM, Balducci I, Kojima AN. Microstrain around dental implants supporting fixed partial prostheses under axial and non-axial loading conditions, in vitro strain gauge analysis. J Craniofac Surg. 2013;24:546–51.
Menani LR, Tiossi R, de Torres ÉM, Ribeiro RF, de Almeida RP. Photoelastic stress analysis of different designs of cement-retained fixed partial dentures on Morse taper oral implants. J Craniofac Surg. 2011;22:674–8.
Korioth TW, Versluis A. Modeling the mechanical behavior of the jaws and their related structures by finite element (FE) analysis. Crit Rev Oral Biol Med. 1997;8:90–104.
Serial posts:
- Abstract : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model
- Background : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model [1]
- Background : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model [2]
- Methods : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model [1]
- Methods : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model [2]
- Methods : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model [3]
- Methods : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model [4]
- Results : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model [1]
- Results : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model [2]
- Results : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model [3]
- Discussion : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model [1]
- Discussion : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model [2]
- Discussion : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model [3]
- Discussion : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model [4]
- Discussion : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model [5]
- Conclusions : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model
- Abbreviations : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model
- References : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model [1]
- References : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model [2]
- References : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model [3]
- References : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model [4]
- Acknowledgements : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model
- Author information : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model
- Additional information : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model
- Rights and permissions : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model
- About this article : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model
- Table 1 Mechanical properties of the materials used in the FEA : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model
- Table 2 Coefficients of variation in implant displacement under loading conditions : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model
- Table 3 Three-way ANOVA (displacement in the buccolingual direction [x-axis]) : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model
- Table 4 Three-way ANOVA (displacement in the mesiodistal direction [y-axis]) : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model
- Table 5 Three-way ANOVA (displacement in the inferior-superior direction [z-axis]) : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model
- Table 6 Three-way ANOVA (equivalent stress) : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model
- Table 7 Coefficients of variation for equivalent stresses : A biomechanical investigation of mandibular molar implants: reproducibility and validity of a finite element analysis model
- Figure 1. An artificial mandible. : A biomechanical investigation of mandibular molar implant
- Figure 2. Three implants were embedded in an artificial mandible. : A biomechanical investigation of mandibular molar implant
- Figure 3. An experimental model. (a) Buccal loading, (b) central loading, and (c) lingual loading are shown. : A biomechanical investigation of mandibular molar implant
- Figure 4. An experimental model loading test. : A biomechanical investigation of mandibular molar implant
- Figure 5. An FEA model. (a) Buccal loading, (b) central loading, and (c) lingual loading are shown. : A biomechanical investigation of mandibular molar implant
- Figure 6. Implant displacement under loading conditions. : A biomechanical investigation of mandibular molar implant
- Figure 7. The displacement of the three implants. (M) Mesial side, (D) Distal side, (B) Buccal side, and (L) Lingual side are shown. : A biomechanical investigation of mandibular molar implant
- Figure 8. Displacement in the buccolingual direction (x-axis). (a) The contact model and (b) the fixation model. : A biomechanical investigation of mandibular molar implant
- Figure 9. Displacement in the mesiodistal direction (y-axis). (a) The contact model and (b) the fixation model. : A biomechanical investigation of mandibular molar implant
- Figure 10. Displacement in the inferior-superior direction (z-axis). (a) The contact model and (b) the fixation model. : A biomechanical investigation of mandibular molar implant
- Figure 11. The distribution of equivalent stress (MPa) around the first molar. : A biomechanical investigation of mandibular molar implant
- Figure 12. Equivalent stresses at (a) the neck and (b) the tip of the implant. : A biomechanical investigation of mandibular molar implant